UPVC Door Lock Replacement
UPVC doors are a fantastic deterrent to break-ins. They do have their limitations, but they can be overcome with the installation of a deadlock.
If your uPVC front door lock is loose or sloppy, it could be time to replace the barrel lock. This easy DIY project will increase the security of your home and boost its appearance.
Removal of the old lock cylinder
If you're experiencing that your front door is fragile when you lock it or that the key is struggling to turn, you may have a damaged lock cylinder. Replacing it will ensure that it operates smoothly and increase security. The procedure is fairly easy and will take around 30 minutes. You'll only need a screwdriver. To begin by opening your door, look at the edge near the lock cylinder. You will see a screw there that is roughly in line with the bottom of the cylinder. Take it off using a screwdriver, and store it safely.
You'll need to know the exact size of the cylinder you have in order to find a suitable replacement. Typically, company website vary between 60mm and 110mm. To determine the size of the lock, you will need remove the faceplate screw. You can also turn the handle while the cylinder remains in place to gauge the amount it moves.
The next step is to measure the cylinder diameter and cylinder cam length. These measurements are essential to ensure that the new lock will be able to fit into the door. Based on the type of uPVC door, these dimensions can vary. You'll need to choose an alternative cylinder that is the same size or slightly larger than the existing one.
Once you have the measurements, it's time to remove the old cylinder from the door. It's a simple task but you need to perform it properly to avoid damaging your door frame or door. Make sure that the door is propped up or secured so it does not close between steps.
If you don't have the time to tackle it yourself, a professional locksmith is a good option. They can provide expert advice, perfect execution and peace of mind. They can also assist you in selecting a safe and secure lock system. DIY is a great option to save money as well as learn new techniques. All you need is patience and the right tools such as a Phillips screwdriver. Changing your uPVC lock isn't as difficult as it appears.
Installing a new lock cylinder
It is essential to follow the correct procedure and make sure you use the correct measurements when replacing a lock at your front door. This will not only allow you to avoid future problems but it will keep your home safe and permit you to use a key for both sides of the door. Before you replace your uPVC lock, you should take measurements of the length overall and the backset as well as the cylinder's diameter. These measurements will ensure that the new lock cylinder fits inside the uPVC frame and operates properly without gaps or weaknesses in security.
The first step in the process is to take off the door handle by loosening the screws holding it by using the screwdriver. The next step is to locate the barrel screw which holds the lock in place, and then remove it. You can then remove the lock that was previously in place by inserting the key into the cylinder and turning it left and right. If the key is in either of these positions you should be able to take off the cylinder by wriggling it out of its slot.
Installing the new cylinder in the front door is simple and requires the same steps that you followed to remove the old one. But, it is important to note that the new cylinder won't fit in the area where the previous one was. This is due to the fact that the cylinder has to be aligned properly to allow it to be locked and closed with the key. Make sure that the cylinder is in the center and has an elongated keyway.
It isn't difficult to install a new uPVC door lock, but you must be cautious not to damage the door frames or handles. If you aren't sure whether you're able to complete this project, hire a professional who is certified by Checkatrade and has experience with these types of door. A locksmith can save time and money by finishing the task efficiently and quickly.
Reattaching the door handle
You may want to change your lock on the front of your home due to a variety of reasons. You might have lost a lock key and the previous tenant has not returned the keys, or you want to upgrade to the most secure lock. Change the barrel on a lock on a uPVC door is a straightforward job that can be done in about five minutes. You'll need a Phillips head screwdriver, a new cylinder of the lock and a spare key (if you intend to make use of one). Make sure the door is opened or secured securely to ensure that it doesn't shut during the process.
It's not as difficult as you may think to change the lock mechanism on the uPVC door. It is important to begin by determining the type of lock you have installed on your front door and what size you require for the replacement. The majority of modern uPVC doors come with single euro-cylinder locks. However, there are strip locks and multipoint locks that are available for older doors. It's much easier to replace your uPVC door lock if you know the brand and model it is.
Once you've replaced the cylinder, it's time to connect the door handle back to it. To begin, you'll be required to loosen the set screw on the spindle shaft of the handle with the aid of a screwdriver. Then, you can take the handle off to expose the shaft. If the shaft is threaded you will need to loosen a bit and then back it up with a screwdriver in order to ensure that it is properly fitted.
After you've tightened the screws on the new handle and the lock cylinder, it's now time to test the lock. Make sure that the key fits and turns easily, and that the handle's locking mechanism is functioning properly. A locksmith can assist you if you're not confident doing it yourself.
It is also important to remember that uPVC door handles and lock mechanisms require regular oiling to keep their functionality. This is especially applicable in areas that experience high wear and tear such as those that are frequently used or closed and locked. A little bit of lubricant goes a long ways towards ensuring that they work properly and prolong their life.
Testing the new lock
A door lock made of upvc is an essential element of your home's security. Like every other device it will wear out over time or become damaged. Regular maintenance is crucial to a functioning uPVC locking system. This will prevent issues from appearing and compromising the security of your home. The best method to do this is to lubricate the internal mechanisms using an approved oil every six months. This will prevent the lock from rusting and damage.
You can apply a silicon spray in addition to the regular lubricant to loosen the keyway. This makes it easier to insert the keys. This is a simple DIY fix that will save you money over the course of time. Just be sure not to use WD-40because it will leave oil residue that could damage the lock.
After you have installed the new cylinder, it's essential to test it before assuming that it works properly. This can be done by testing the handle from both inside and outside the door. It is now time to put the handles back in position and re-insert the screws into the spindle to confirm that everything is in order. Then, re-insert those screws that were holding them in place and pat yourself on the back for a job well done!
If you're seeking to increase your home's security Locksmiths can install additional features, such as door chains or sash jammers. They can help you select the best locks for your home. A professional can also assist you in determining the right size cylinder for your doors. This is crucial because a wrong lock could compromise your security.
The cost of replacing the lock of a uPVC lock varies based upon the type of lock used and the number of doors that have to be replaced. The cost of a professional locksmith ranges between PS75 and PS100 per hour. However, the price may vary depending on where you live and the type of lock you require. Compare locksmith costs before settling on the right company.